PPA Zytel® HTNFR52G45BL BK337 DUPONT USA
111
- Unit Price:
- $6321 USD/MT
- Packaging Specification:
- 25 KG/PKG
- Supply Quantity:
- 61.6MT
- Delivery Terms:
- FOB
- Port of Loading:
- China Main Port
- Accepted Payment Methods:
- T/T
- Shipping:
- Negotiate supplier for shipping details
Supplier Information
ASIA PLASTIC EXCHANGE LIMITED
+86 755 2787 3515View
serv********View
For more detailed information including pricing, customization, and shipping, please contact supplier.
Material Description
Technical Data Sheet
Material Description
- Material Properties:Dimensional stability Low water absorption Heat aging high strength High rigidity
- Application Areas:electrical equipment household electrical appl Automotive interior parts
- Color:--
- Grade:Flame retardant enhanced grade
Technical Data Sheet
Compare
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Shrinkage rate | Across Flow | ISO 294-4 | 0.60 | % |
| 流量 | ISO 294-4 | 0.20 | % |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Tensile modulus | ISO 527-2 | 15500 | Mpa | |
| Tensile stress | Break | ISO 527-2 | 167 | Mpa |
| Tensile strain | Break | ISO 527-2 | 1.7 | % |
| Bending modulus | ISO 178 | 15100 | Mpa | |
| Bending stress | ISO 178 | 249 | Mpa |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Hot deformation temperature | 1.8 MPa, Unannealed | ISO 75-2/A | 284 | °C |
| Melting temperature 3 | ISO 11357-3 | 310 | °C | |
| Linear coefficient of thermal expansion | Flow | ISO 11359-2 | 1.5E-5 | cm/cm/°C |
| Flow : -40 to 23°C | ISO 11359-2 | 1.3E-5 | cm/cm/°C | |
| Flow : 55 to 160°C | ISO 11359-2 | 1.4E-5 | cm/cm/°C | |
| Across Flow | ISO 11359-2 | 5.0E-5 | cm/cm/°C | |
| Across Flow : -40 to 23°C | ISO 11359-2 | 4.3E-5 | cm/cm/°C | |
| Across Flow : 55 to 160°C | ISO 11359-2 | 8.0E-5 | cm/cm/°C | |
| RTI Elec | 0.40 mm | UL 746 | 140 | °C |
| 0.75 mm | UL 746 | 140 | °C | |
| 1.5 mm | UL 746 | 140 | °C | |
| 3.0 mm | UL 746 | 140 | °C |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Volume resistivity | IEC 62631-3-1 | > 1.0E+13 | ohms·m | |
| Dielectric strength | IEC 60243-1 | 40 | KV/mm | |
| Relative permittivity | 1 MHz | IEC 62631-2-1 | 4.40 | |
| 100 Hz | IEC 62631-2-1 | 4.70 | ||
| Dissipation factor | 100 Hz | IEC 62631-2-1 | 6.0E-3 | |
| 1 MHz | IEC 62631-2-1 | 0.012 | ||
| Leakage Trace Index | IEC 60112 | 600 | V |
| injection | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| drying temperature | 100 | °C | ||
| Drying time - hot air dryer | 6.0 到 8.0 | hr | ||
| Suggested maximum moisture content | 0.10 | % | ||
| Processing (melt) temperature | 320 到 325 | °C | ||
| Mold temperature | 90 到 130 | °C | ||
| Drying Recommended | yes |
| Impact performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Impact strength of simply supported beam without notch | -30°C | ISO 179/1eU | 45 | kJ/m² |
| 23°C | ISO 179/1eU | 48 | kJ/m² |
| flammability | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| UL flame retardant rating | 0.40 mm | UL 94, IEC 60695-11-10, -20 | V-0 | |
| Burning wire flammability index | 0.40 mm | IEC 60695-2-12 | 960 | °C |
| 0.75 mm | IEC 60695-2-12 | 960 | °C | |
| 1.5 mm | IEC 60695-2-12 | 960 | °C | |
| 3.0 mm | IEC 60695-2-12 | 960 | °C | |
| Hot filament ignition temperature | 0.40 mm | IEC 60695-2-13 | 700 | °C |
| 0.75 mm | IEC 60695-2-13 | 750 | °C | |
| 1.5 mm | IEC 60695-2-13 | 750 | °C | |
| 3.0 mm | IEC 60695-2-13 | 800 | °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.