PSU UDEL® P-1700 NO184 SOLVAY USA
117
- Unit Price:
- $40618 USD/MT
- Packaging Specification:
- 25 KG/PKG
- Supply Quantity:
- 10MT
- Delivery Terms:
- FOB
- Port of Loading:
- China Main Port
- Accepted Payment Methods:
- T/T
- Shipping:
- Negotiate supplier for shipping details
Supplier Information
ASIA PLASTIC EXCHANGE LIMITED
+86 755 2787 3515View
serv********View
For more detailed information including pricing, customization, and shipping, please contact supplier.
Material Description
Technical Data Sheet
Material Description
- Material Properties:dimensional stability Electron beam disinfectio Radiopable Radiation disinfection Pressure cooker disinfect Good disinfection perform Ethylene oxide disinfecti Anti gamma radiation Chemical resistance Alkali resistant Alcohol resistance heat-resisting Acid resistance Resistance to hydrocarbon Detergent resistant Steam resistant Thermal disinfection High toughness Biocompatibility Food contact compliance Hydrolysis resistance Disinfect with steam Excellent appearance
- Application Areas:Electrical field Electrical components Electrical appliances Electronic field valve Valve components Industrial components Pipeline components Pipeline components Nursing supplies Home appliance components Automotive sector Food service sector Surgical instruments Microwave cooker Dental application field Medical devices Medical devices Medical supplies
- Color:--
- Grade:Injection grade
Technical Data Sheet
Compare
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Density/specific gravity | ASTMD792 | 1.24 | g/cm³ | |
| Melt mass flow rate | 343°C/2.16kg | ASTMD1238 | 6.5 | g/10min |
| Shrinkage rate | MD | ASTMD955 | 0.70 | % |
| Water absorption rate | 24hr | ASTMD570 | 0.30 | % |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Tensile modulus | ASTMD638 | 2480 | Mpa | |
| Tensile strength | ASTMD638 | 70.3 | Mpa | |
| elongation | Break | ASTMD638 | 50to100 | % |
| Bending modulus | ASTMD790 | 2690 | Mpa | |
| bending strength | ASTMD790 | 106 | Mpa |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Hot deformation temperature | 1.8MPa,Unannealed | ASTMD648 | 174 | °C |
| Linear coefficient of thermal expansion | MD | ASTMD696 | 5.6E-05 | cm/cm/°C |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Volume resistivity | ASTMD257 | 3E+16 | ohms·cm | |
| Dielectric strength | ASTMD149 | 17 | KV/mm | |
| Dielectric constant | 60Hz | ASTMD150 | 3.03 | |
| 1kHz | ASTMD150 | 3.04 | ||
| 1MHz | ASTMD150 | 3.02 | ||
| Dissipation factor | 60Hz | ASTMD150 | 7E-04 | |
| 1kHz | ASTMD150 | 1E-03 | ||
| 1MHz | ASTMD150 | 6E-03 |
| Impact performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Tensile impact strength | ASTMD1822 | 420 | kJ/m² | |
| Impact strength of cantilever beam gap | ASTMD256 | 69 | J/m |
| flammability | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| UL flame retardant rating | 1.5mm,ALL | UL94 | HB | |
| 4.5mm,NC | UL94 | V-0 | ||
| Burning wire flammability index | 0.8mm | IEC60695-2-12 | 850 | °C |
| 1.6to6.0mm | IEC60695-2-12 | 960 | °C | |
| Hot filament ignition temperature | 0.8mm | IEC60695-2-13 | 875 | °C |
| 1.6to6.0mm | IEC60695-2-13 | 850 | °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.