PA12 Pebax® 7033 SP 01 ARKEMA USA

135

Unit Price:
$14409 USD/MT
Packaging Specification:
25 KG/PKG
Supply Quantity:
52.5MT
Delivery Terms:
FOB
Port of Loading:
China Main Port
Accepted Payment Methods:
T/T
Shipping:
Negotiate supplier for shipping details

Supplier Information

ASIA PLASTIC EXCHANGE LIMITED

+86 755 2787 3515View

serv********View

For more detailed information including pricing, customization, and shipping, please contact supplier.

Material Description

Technical Data Sheet

Material Description

Material Properties:High temperature resistan Low temperature resistanc
Application Areas:Medical Supplies
Color:--
Grade:Injection grade

Technical Data Sheet Compare

physical property	Test Condition	Test Method	Test Result	Unit
Shrinkage rate	Across Flow	ISO 294-4	1.5	%
Shrinkage rate	Shrinkage rate	流量	ISO 294-4	1.2	%
Water absorption rate	Saturation, 23°C	ISO 62	1.1	%
Water absorption rate	Water absorption rate	Equilibrium, 23°C, 50% RH	ISO 62	0.70	%

Mechanical performance	Test Condition	Test Method	Test Result	Unit
Tensile modulus		ISO 527-2	414	Mpa
Tensile stress	Yield	ISO 527-2	23.0	Mpa
	Tensile stress	Break	ISO 527-2	54.0	Mpa
		Tensile stress	10% Strain	ISO 527-2	22.0	Mpa
		Tensile stress	Tensile stress	100% Strain	ISO 527-2	21.0	Mpa
Tensile strain	Yield	ISO 527-2	22	%
Tensile strain	Tensile strain	Break	ISO 527-2	> 300	%
Nominal tensile fracture strain		ISO 527-2	> 50	%

Thermal performance	Test Condition	Test Method	Test Result	Unit
Hot deformation temperature	0.45 MPa, Unannealed	ISO 75-2/B	99.0	°C
Vicat softening temperature		ISO 306/B50	164	°C
Melting temperature 2		ISO 11357-3	172	°C
Linear coefficient of thermal expansion - flow		ISO 11359-2	1.6E-4	cm/cm/°C

Electrical performance	Test Condition	Test Method	Test Result	Unit
Surface resistivity		IEC 60093	--	ohms
Leakage Trace Index		IEC 60112	--	V

Filling analysis	Test Result	Unit
Melt density	0.830	g/cm³
Thermal conductivity of melt	0.20	W/m/K
Specific Heat Capacity of Melt	2700	J/kg/°C

injection	Test Result	Unit
drying temperature	70 到 80	°C
drying time	5.0 到 7.0	hr
Processing (melt) temperature	230 到 290	°C
Mold temperature	25 到 60	°C

squeeze	Test Result	Unit
drying temperature	70 到 80	°C
drying time	5.0 到 7.0	hr
Melt Temperature	220 到 250	°C

Impact performance	Test Condition	Test Method	Test Result	Unit
Impact strength of simply supported beam without notch	-30°C	ISO 179/1eU	无断裂
Impact strength of simply supported beam without notch	Impact strength of simply supported beam without notch	23°C	ISO 179/1eU	无断裂

hardness	Test Condition	Test Method	Test Result	Unit
Supporting hardness	Shore D, 15 sec	ISO 7619-1	61

flammability	Test Condition	Test Method	Test Result	Unit
Flammability level	1.6 mm	IEC 60695-11-10, -20	HB
Flammability level	Flammability level	3.1 mm	IEC 60695-11-10, -20	HB

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.