PBT Cristin® S600F20-NC010 DUPONT USA
131
- Unit Price:
- $4987 USD/MT
- Packaging Specification:
- 25 KG/PKG
- Supply Quantity:
- 10MT
- Delivery Terms:
- FOB
- Port of Loading:
- China Main Port
- Accepted Payment Methods:
- T/T
- Shipping:
- Negotiate supplier for shipping details
Supplier Information
ASIA PLASTIC EXCHANGE LIMITED
+86 755 2787 3515View
serv********View
For more detailed information including pricing, customization, and shipping, please contact supplier.
Material Description
Technical Data Sheet
Material Description
- Material Properties:Flame retardant Glass fiber reinforced Good dimensional stabilit Good resistance to chemic
- Application Areas:Electronic and electrical Automotive Applications
- Color:--
- Grade:Injection grade
Technical Data Sheet
Compare
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Water absorption rate | -，23C/59RH | % | ISO 62 | 0.2 |
| -，Sat/23C | % | ISO 62 | 0.40 | |
| Saturation,23°C,2.00mm | ISO62 | 0.40 | % | |
| Equilibrium,23°C,2.00mm,50%RH | ISO62 | 0.20 | % | |
| Shrinkage rate | TD | ISO294-4 | 1.6 | % |
| MD | ISO294-4 | 1.7 | % | |
| -，Across Flow | % | ISO 294-4 | 1.6 | |
| -，Flow | % | ISO 294-4 | 1.7 | |
| Melt mass flow rate | 250°C/2.16kg | ISO1133 | 19 | g/10min |
| MediumDensity | 1.11 | g/cm³ | ||
| Top out temperature | 170 | °C | ||
| SpecificHeatCapacity of Melt | 2110 | J/kg/°C | ||
| ThermalConductivityofMelt | 0.21 | W/m/K | ||
| Stickiness number | ISO307 | 130 | cm³/g | |
| Density/specific gravity | g/cm | ISO 1183 | 1.31 | |
| ISO1183 | 1.31 | g/cm³ |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Nominal tensile fracture strain | ISO527-2 | 40 | % | |
| Charpy non notched impact strength | -，-30 ℃, Type 1, Edgewise | KJ/m | ISO 179 | No Break |
| -，23 ℃, Type 1, Edgewise | KJ/m | ISO 179 | No Break | |
| Charpy notch impact strength | -，-30 ℃, Type 1, Edgewise, Notch A | KJ/m | ISO 179 | |
| -，23 ℃, Type 1, Edgewise, Notch A | KJ/m | ISO 179 | ||
| TensileCreepModule | 1hr | ISO899-1 | 2600 | Mpa |
| Fracture point tensile strain | 23 ℃, 50 mm/min | % | ISO 527-1, -2 | |
| Yield point tensile stress | 23 ℃, 50 mm/min | MPa | ISO 527-1, -2 | 58 |
| Yield point tensile strain | 23 ℃, 50 mm/min | % | ISO 527-1, -2 | 7.6 |
| Nominal tensile strain at the fracture point | 23 ℃, 50 mm/min | % | ISO 527-1, -2 | |
| Bending stress | ISO178 | 85.0 | Mpa | |
| Gap impact strength | 23 ℃, Type 1, Notch A | KJ/m | ISO 180 | |
| Tensile creep modulus | -，1000h | MPa | ISO 899-1 | 1800 |
| 1000hr | ISO899-1 | 1800 | Mpa | |
| Tensile stress | Yield | ISO527-2 | 58.0 | Mpa |
| Tensile strain | Yield | ISO527-2 | 5.0 | % |
| Tensile modulus | 23 ℃, 1.0 mm/min | MPa | ISO 527-1, -2 | 2600 |
| ISO527-2 | 2500 | Mpa | ||
| Bending modulus | ISO178 | 2200 | Mpa | |
| bending strength | MPa | ISO 178 | 85 |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Hot deformation temperature | -，0.45 Mpa，Unannealed | ℃ | ISO 75B-1, -2 | 180 |
| -，1.8 Mpa，Unannealed | ℃ | ISO 75B-1, -2 | ||
| 0.45MPa,Unannealed | ISO75-2/B | 115 | °C | |
| 0.45MPa,Annealed | ISO75-2/B | 180 | °C | |
| 1.8MPa,Unannealed | ISO75-2/A | 50.0 | °C | |
| 1.8MPa,Annealed | ISO75-2/A | 60.0 | °C | |
| Flame retardant grade | 1.50 mm | UL94 | HB | |
| 3.00 mm | UL94 | HB | ||
| Linear coefficient of thermal expansion | MD：-40to23°C | ISO11359-2 | 8E-05 | cm/cm/°C |
| MD：55to160°C | ISO11359-2 | 1.9E-04 | cm/cm/°C | |
| TD：-- | ISO11359-2 | 1.2E-04 | cm/cm/°C | |
| TD：-40to23°C | ISO11359-2 | 9E-05 | cm/cm/°C | |
| TD：55to160°C | ISO11359-2 | 2E-04 | cm/cm/°C | |
| MD：-- | ISO11359-2 | 1.1E-04 | cm/cm/°C | |
| Melting temperature | ℃ | ISO 3146 | 225 | |
| Linear coefficient of thermal expansion | 平行Flow ，23 to 55°C (73 to 130°F) | cm/cm/°C | ISO 11359-1, -2 | 0.00013 |
| 垂直Flow ，23 to 55°C (73 to 130°F) | cm/cm/°C | ISO 11359-1, -2 | 0.00013 | |
| PeakCrystallizationTemperature2 | ISO11357-3 | 192 | °C | |
| Vicat softening temperature | ISO306/B50 | 175 | °C | |
| Melting temperature 2 | ISO11357-3 | 225 | °C | |
| Glass transition temperature 2 | ISO11357-2 | 55.0 | °C |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Relative permittivity | 100Hz | IEC60250 | 3.60 | |
| 1MHz | IEC60250 | 3.20 | ||
| Leakage Trace Index | IEC60112 | 400 | V | |
| Dielectric strength | IEC60243-1 | 26 | KV/mm | |
| Dissipation factor | 100Hz | IEC60250 | 7.9E-04 | |
| 1MHz | IEC60250 | 0.020 | ||
| Surface resistivity | IEC60093 | 1E+12 | ohms | |
| Volume resistivity | IEC60093 | >1.0E+15 | ohms·cm |
| Impact performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Impact strength of simply supported beam without notch | -30°C | ISO179/1eU | NoBreak | |
| 23°C | ISO179/1eU | NoBreak | ||
| Unscented Izod impact strength | 23°C | ISO180/1U | NoBreak | |
| Charpy Notched Impact Strength | -30°C | ISO179/1eA | 4.0 | kJ/m² |
| 23°C | ISO179/1eA | 5.0 | kJ/m² | |
| Impact strength of cantilever beam gap | 23°C | ISO180/1A | 4.5 | kJ/m² |
| Other performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Extreme Oxygen Index | % | ISO 4589-1, -2 | 22 |
| flammability | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| UL flame retardant rating | 0.75mm | UL94 | HB | |
| 1.5mm | UL94 | HB | ||
| 0.75mm | IEC60695-11-10,-20 | HB | ||
| 1.5mm | IEC60695-11-10,-20 | HB | ||
| Extreme Oxygen Index | ISO4589-2 | 22 | % | |
| FMVSS flammability | FMVSS302 | SE | ||
| Fogging-G-value | condensate | ISO6452 | 0.0 | g |
| Supplementary Information | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Odor3 | VDA270 | 3.00 | ||
| Thermal Desorption Analysis of Organic Emissions4 | VDA278 | 1.00 | µg/g |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.