PBT Cristin® S620F20 DUPONT USA
121
- Unit Price:
- $3427 USD/MT
- Packaging Specification:
- 25 KG/PKG
- Supply Quantity:
- 63.5MT
- Delivery Terms:
- FOB
- Port of Loading:
- China Main Port
- Accepted Payment Methods:
- T/T
- Shipping:
- Negotiate supplier for shipping details
Supplier Information
ASIA PLASTIC EXCHANGE LIMITED
+86 755 2787 3515View
serv********View
For more detailed information including pricing, customization, and shipping, please contact supplier.
Material Description
Technical Data Sheet
Material Description
- Material Properties:Medium viscosity
- Application Areas:Electronic and electrical
- Color:--
- Grade:Injection grade
Technical Data Sheet
Compare
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Shrinkage rate | TD | ISO294-4 | 1.6 | % |
| MD | ISO294-4 | 1.7 | % | |
| Water absorption rate | Saturation,23°C,2.00mm | ISO62 | 0.40 | % |
| Equilibrium,23°C,2.00mm,50%RH | ISO62 | 0.20 | % | |
| Melt mass flow rate | 250°C/2.16kg | ISO1133 | 19 | g/10min |
| Stickiness number | ISO307 | 130 | cm³/g | |
| Density/specific gravity | ISO1183 | 1.31 | g/cm³ |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Bending stress | ISO178 | 88.0 | Mpa | |
| Nominal tensile fracture strain | ISO527-2 | 30 | % | |
| Tensile stress | Yield | ISO527-2 | 59.0 | Mpa |
| Tensile strain | Yield | ISO527-2 | 8.0 | % |
| Tensile creep modulus | 1hr | ISO899-1 | 2600 | Mpa |
| 1000hr | ISO899-1 | 1800 | Mpa | |
| Tensile modulus | ISO527-2 | 2600 | Mpa |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Hot deformation temperature | 0.45MPa,Unannealed | ISO75-2/B | 145 | °C |
| 0.45MPa,Annealed | ISO75-2/B | 180 | °C | |
| 1.8MPa,Unannealed | ISO75-2/A | 60.0 | °C | |
| 1.8MPa,Annealed | ISO75-2/A | 60.0 | °C | |
| Linear coefficient of thermal expansion | MD | ISO11359-2 | 1.3E-04 | cm/cm/°C |
| TD | ISO11359-2 | 1.3E-04 | cm/cm/°C | |
| Vicat softening temperature | ISO306/B50 | 175 | °C | |
| Melting temperature 3 | ISO11357-3 | 225 | °C | |
| Crystallization peak temperature 3 | ISO11357-3 | 192 | °C |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Relative permittivity | 100Hz | IEC60250 | 3.80 | |
| 1MHz | IEC60250 | 3.20 | ||
| Leakage Trace Index | IEC60112 | 600 | V | |
| Dielectric strength | IEC60243-1 | 26 | KV/mm | |
| Dissipation factor | 100Hz | IEC60250 | 2E-03 | |
| 1MHz | IEC60250 | 0.020 | ||
| Volume resistivity | IEC60093 | >1.0E+15 | ohms·cm |
| Filling analysis | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Melt density | 1.11 | g/cm³ | ||
| Top out temperature | 170 | °C | ||
| SpecificHeatCapacity of Melt | 2100 | J/kg/°C | ||
| ThermalConductivityofMelt | 0.21 | W/m/K |
| Impact performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Unscented Izod impact strength | -30°C | ISO180/1U | 70 | kJ/m² |
| 23°C | ISO180/1U | 140 | kJ/m² | |
| Impact strength of simply supported beam without notch | -30°C | ISO179/1eU | 无断裂 | |
| 23°C | ISO179/1eU | 无断裂 | ||
| Charpy Notched Impact Strength | -30°C | ISO179/1eA | 3.5 | kJ/m² |
| 23°C | ISO179/1eA | 4.5 | kJ/m² | |
| Impact strength of cantilever beam gap | -30°C | ISO180/1A | 5.0 | kJ/m² |
| 23°C | ISO180/1A | 4.0 | kJ/m² |
| flammability | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| FMVSS flammability | FMVSS302 | SE/NBR | ||
| UL flame retardant rating | 0.8mm | UL94,IEC60695-11-10,-20 | HB | |
| 1.5mm | UL94,IEC60695-11-10,-20 | HB | ||
| Extreme Oxygen Index | ISO4589-2 | 22 | % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.