Technical Data Sheet
Compare
| Physical properties | Test Condition | Test Method | Test Result | Unit |
|---|
| density | | ASTM D792/ISO 1183 | 1.62 | |
| Water absorption rate 23 ℃/24h | | ASTM D570/ISO 62 | 0.04 | % |
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|
| Water absorption rate | 23°C,24hr | ISO62 | 0.040 | % |
| Shrinkage rate | Flow ，80℃×2mmt | | 0.4 | % |
| Shrinkage rate | Across Flow ，80℃×2mmt | | 1.0 | % |
| Melt viscosity | 310°C,1000sec^-1 | ISO11443 | 200000 | mPa·s |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Charpy Notched Impact Strength | | ISO 179/1eA | 2.5 | KJ/m |
| Fracture strain | | ISO 527-1,2 | 1.7 | % |
| Tensile stress | | ISO527-2 | 125 | Mpa |
| Tensile strain | Break | ISO527-2 | 1.7 | % |
| Bending stress | | ISO178 | 230 | Mpa |
| elongation at break | | ASTM D638/ISO 527 | 1.7 | % |
| Tensile modulus | | ASTM D638/ISO 527 | 230 | kg/cm²(MPa)[Lb/in²] |
| tensile strength | | ASTM D638/ISO 527 | 125 | kg/cm²(MPa)[Lb/in²] |
| tensile strength | | ISO 527-1,2 | 125 | Mpa |
| Bending modulus | | ISO 178 | 11500 | Mpa |
| Bending modulus | | ASTM D790/ISO 178 | 11,500 | kg/cm²(MPa)[Lb/in²] |
| Bending modulus | | ISO178 | 11500 | Mpa |
| bending strength | | ISO 178 | 230 | Mpa |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Hot deformation temperature | 1.8MPa,Unannealed | ISO75-2/A | 210 | °C |
| melting point | | | 210 | ℃（℉） |
| Linear expansion coefficient | | ASTM D696/ISO 11359 | 2 | mm/mm.℃ |
| Linear coefficient of thermal expansion | Flow | ISO 11359-2 | 2 | |
| Linear coefficient of thermal expansion | Across Flow | | 4 | |
| Linear coefficient of thermal expansion | TD | 内部方法 | 4E-05 | cm/cm/°C |
| Linear coefficient of thermal expansion | MD | 内部方法 | 2E-05 | cm/cm/°C |
| Load deformation temperature | 1.8MPa | ISO 75-1 | 210 | °C |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| dielectric breakdown strength | 1KHz | IEC 60250 | 0.021 | |
| dielectric breakdown strength | 1MHz | IEC 60250 | 0.096 | |
| Dielectric loss factor | 3mmt | IEC 60243-1 | 9 | KV/mm |
| Resistant to conductive tracks | | IEC 60112 | 150 | V |
| Dissipation factor | 1kHz | IEC60250 | 0.020 | |
| Dissipation factor | 1MHz | IEC60250 | 0.10 | |
| Dissipation factor | 耐电弧性 | IEC60250 | 116 | sec |
| Dielectric strength | 3.00mm | IEC60243-1 | 9.0 | KV/mm |
| Relative permittivity | 1kHz | IEC60250 | 7.60 | |
| Relative permittivity | 1MHz | IEC60250 | 6.40 | |
| Leakage Trace Index | | IEC60112 | 150 | V |
| Surface resistivity | | IEC 60093 | 1×10 | Ω |
| Surface resistivity | | ASTM D257/IEC 60093 | 7.6 | Ω |
| Dielectric constant | 1KHz | IEC 60250 | 7.6 | |
| Dielectric constant | 1MHz | IEC 60250 | 6.4 | |
| Volume resistivity | | ASTM D257/IEC 60093 | 9 x 1015 | Ω.cm |
| Volume resistivity | | IEC 60093 | 9×10 | Ω·cm |
| Volume resistivity | | IEC60093 | 9E+15 | ohms·cm |
| hardness | Test Condition | Test Method | Test Result | Unit |
|---|
| Rockwell hardness | M-Scale | ISO2039-2 | 100 | |
| flammability | Test Condition | Test Method | Test Result | Unit |
|---|
| UL flame retardant rating | | UL94 | V-0 | |
| Basic performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Melt viscosity | 310℃,1000/sec | ISO 11443 | 200 | Pa·s |
| Water absorption rate | 23℃,水中24hr | ISO 62 | 0.02 | % |
| density | | ISO 1183 | 1.62 | g/cm |
| Supplementary Information | Test Condition | Test Method | Test Result | Unit |
|---|
| ColourNumber | | | HF2000/HD9100 | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
