PC/ABS CYCOLOY™ 143R-GY7G036 L10932439 SABIC INNOVATIVE NANSHA
134
Unit Price:$4046 USD/MT
- Packaging Specification:
- 25 KG/PKG
- Supply Quantity:
- 10MT
- Delivery Terms:
- FOB
- Port of Loading:
- China Main Port
- Accepted Payment Methods:
- T/T
- Shipping:
- Negotiate supplier for shipping details
Supplier Information
ASIA PLASTIC EXCHANGE LIMITED
+86 755 2787 3515View
serv********View
For more detailed information including pricing, customization, and shipping, please contact supplier.
Material Description
Technical Data Sheet
Material Description
- Material Properties:Low viscosity Weather resistance UV resistance
- Application Areas:film Wire and cable
- Color:--
- Grade:Heat resistant grade
Technical Data Sheet
Compare
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Density/specific gravity | -- | ASTMD792 | 1.19 | g/cm³ |
| Specific volume | ASTMD792 | 0.835 | cm³/g | |
| Melt mass flow rate | 300°C/1.2kg | ASTMD1238 | 11 | g/10min |
| Shrinkage rate | MD：3.20mm | 内部方法 | 0.50到0.70 | % |
| Water absorption rate | 24hr | ASTMD570 | 0.15 | % |
| Equilibrium,23°C | ASTMD570 | 0.35 | % | |
| Equilibrium,100°C | ASTMD570 | 0.58 | % | |
| Outdoor applicability | UL746C | f1 | ||
| Density/specific gravity | -- | ASTMD792 | 1.20 | g/cm³ |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Tensile strength 1 | Yield | ASTMD638 | 62.1 | Mpa |
| Break | ASTMD638 | 65.5 | Mpa | |
| Elongation rate 2 | Yield | ASTMD638 | 7.0 | % |
| Break | ASTMD638 | 110 | % | |
| Bending modulus 3 | 50.0mmSpan | ASTMD790 | 2340 | Mpa |
| Bending strength 4 | Yield,50.0mmSpan | ASTMD790 | 93.1 | Mpa |
| Taber abraser | 1000Cycles,1000g,CS-17Wheel | ASTMD1044 | 10.0 | mg |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Hot deformation temperature | 0.45MPa,Unannealed,6.40mm | ASTMD648 | 138 | °C |
| 1.8MPa,Unannealed,6.40mm | ASTMD648 | 132 | °C | |
| Vicat softening temperature | ASTMD15256 | 154 | °C | |
| Linear coefficient of thermal expansion | MD：-40to95°C | ASTME831 | 6.8E-05 | cm/cm/°C |
| specific heat | ASTMC351 | 1260 | J/kg/°C | |
| thermal conductivity | ASTMC177 | 0.19 | W/m/K | |
| RTIElec | UL746 | 130 | °C | |
| Evolution Calendar intelligent importer | UL746 | 130 | °C | |
| RTI | UL746 | 130 | °C |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Volume resistivity | ASTMD257 | >1.0E+17 | ohms·cm | |
| Dielectric strength | 3.20mm,inAir | ASTMD149 | 15 | KV/mm |
| Dielectric constant | 50Hz | ASTMD150 | 3.17 | |
| 60Hz | ASTMD150 | 3.17 | ||
| 1MHz | ASTMD150 | 2.96 | ||
| Dissipation factor | 50Hz | ASTMD150 | 9E-04 | |
| 60Hz | ASTMD150 | 9E-04 | ||
| 1MHz | ASTMD150 | 0.010 | ||
| Compared to the anti leakage trace index | CTI | UL746 | PLC2 | |
| High arc combustion index | HAI | UL746 | PLC1 | |
| High voltage arc tracing rate | HVTR | UL746 | PLC2 | |
| Hot wire ignition | HWI | UL746 | PLC4 |
| Impact performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Tensile impact strength 5 | ASTMD1822 | 546 | kJ/m² | |
| Impact strength of cantilever beam gap | 23°C | ASTMD256 | 800 | J/m |
| Cantilever beam without notch impact strength | 23°C | ASTMD4812 | 3200 | J/m |
| Falling hammer impact | 23°C | ASTMD3029 | 169 | J |
| hardness | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Rockwell hardness | M-Scale | ASTMD785 | 70 | |
| R-Scale | ASTMD785 | 118 |
| optical performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Refractive index | ASTMD542 | 1.586 | ||
| transmissivity | 2540µm | ASTMD1003 | 88.0 | % |
| Haze | 2540µm | ASTMD1003 | 1.0 | % |
| flammability | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| UL flame retardant rating | 0.762mm | UL94 | HB | |
| Extreme Oxygen Index | ASTMD2863 | 25 | % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top