PC SD POLYCA™ 301-4 SUMITOMO JAPAN

118

Unit Price:
$3919 USD/MT
Packaging Specification:
25 KG/PKG
Supply Quantity:
10.5MT
Delivery Terms:
FOB
Port of Loading:
China Main Port
Accepted Payment Methods:
T/T
Shipping:
Negotiate supplier for shipping details

Supplier Information

ASIA PLASTIC EXCHANGE LIMITED

+86 755 2787 3515View

serv********View

For more detailed information including pricing, customization, and shipping, please contact supplier.

Material Description

Technical Data Sheet

Material Description

Material Properties:--
Application Areas:--
Color:--
Grade:Injection grade

Technical Data Sheet Compare

physical property	Test Condition	Test Method	Test Result	Unit
Melt flow rate	300°C/1.2 kg	ISO 1133	4.0	g/10 min
Molten Volume Flow Rate (MVR)	300°C/1.2 kg	ISO 1133	4.00	cm3/10min
Shrinkage rate	Flow	内部方法	0.50 到 0.70	%
Shrinkage rate	Shrinkage rate	Across Flow	内部方法	0.50 到 0.70	%
Water absorption rate	24 hr, 23°C	ISO 62	0.20	%

Mechanical performance	Test Condition	Test Method	Test Result	Unit
Tensile modulus		ISO 527-2	2300	Mpa
Tensile stress	Yield	ISO 527-2	60.0	Mpa
Tensile strain	Break	ISO 527-2	110	%
Bending modulus		ISO 178	2300	Mpa
Bending stress		ISO 178	92.0	Mpa

Thermal performance	Test Condition	Test Method	Test Result	Unit
Hot deformation temperature	1.8 MPa, Unannealed	ISO 75-2/Af	130	°C
Linear coefficient of thermal expansion	Flow	ISO 11359-2	7.0E-5	cm/cm/°C
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	Across Flow	ISO 11359-2	7.0E-5	cm/cm/°C

Electrical performance	Test Condition	Test Method	Test Result	Unit
Surface resistivity		IEC 60093	> 1.0E+15	ohms
Volume resistivity		IEC 60093	3.0E+16	ohms·cm
Dielectric strength	1.00 mm	IEC 60243-1	31	KV/mm
Relative permittivity	2.00 mm, 100 Hz	IEC 60250	3.00
Relative permittivity	Relative permittivity	2.00 mm, 1 MHz	IEC 60250	3.00
Dissipation factor	2.00 mm, 100 Hz	IEC 60250	1.0E-3
Dissipation factor	Dissipation factor	2.00 mm, 1 MHz	IEC 60250	0.090
Leakage Trace Index		IEC 60112	250	V

injection	Test Result	Unit
drying temperature	125	°C
drying time	4.0 到 6.0	hr
Temperature at the rear of the barrel	280 到 300	°C
Temperature in the middle of the barrel	290 到 310	°C
Temperature at the front of the material cylinder	310 到 330	°C
Spray nozzle temperature	310 到 330	°C
Mold temperature	70 到 100	°C
Screw speed	60 到 100	rpm

Impact performance	Test Condition	Test Method	Test Result	Unit
Impact strength of simply supported beam without notch	23°C	ISO 179	无断裂

hardness	Test Condition	Test Method	Test Result	Unit
Rockwell hardness	R -Sale	ISO 2039-2	118

optical performance	Test Condition	Test Method	Test Result	Unit
Refractive index		ISO 489	1.585
transmissivity	2000 µm	ISO 13468	89.0	%
Haze	2000 µm	ISO 14782	0.40	%

flammability	Test Condition	Test Method	Test Result	Unit
UL flame retardant rating	1.5 mm	UL 94	HB
	UL flame retardant rating	3.0 mm	UL 94	HB
		UL flame retardant rating	0.44 mm	UL 94	V-2
		UL flame retardant rating	UL flame retardant rating	0.75 mm	UL 94	V-2

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.