PC LEXAN™ 4701R-110001 SABIC INNOVATIVE US

113

Unit Price:
$4926 USD/MT
Packaging Specification:
25 KG/PKG
Supply Quantity:
18.8MT
Delivery Terms:
FOB
Port of Loading:
China Main Port
Accepted Payment Methods:
T/T
Shipping:
Negotiate supplier for shipping details

Supplier Information

ASIA PLASTIC EXCHANGE LIMITED

+86 755 2787 3515View

serv********View

For more detailed information including pricing, customization, and shipping, please contact supplier.

Material Description

Technical Data Sheet

Material Description

Material Properties:High temperature resistan transparent
Application Areas:Electronic and electrical
Color:--
Grade:Injection grade

Technical Data Sheet Compare

physical property	Test Condition	Test Method	Test Result	Unit
Water absorption rate	24 hr	ASTM D570	0.19	%
Specific volume		ASTM D792	0.830	cm³/g
Melt flow rate	300°C/1.2 kg	ASTM D1238	2.0	g/10 min
Melt flow rate	Melt flow rate	300°C/6.1 kg	ASTM D1238	9.0	g/10 min
Molten Volume Flow Rate (MVR)	300°C/5.0 kg	ISO 1133	6.00	cm3/10min
Shrinkage rate - flow	3.20 mm	内部方法	0.80 到 1.0	%
Shrinkage rate - Flow 1		内部方法	0.90	%

Mechanical performance	Test Condition	Test Method	Test Result	Unit
Tensile strength 1	Yield	ASTM D638	65.0	Mpa
Tensile strength 1	Tensile strength 1	Break	ASTM D638	77.0	Mpa
Bending modulus 2		ISO 178	2300	Mpa
Tensile stress	Yield	ISO 527-2/50	70.0	Mpa
Tensile strain	Yield	ISO 527-2/50	7.0	%
Tensile strain	Tensile strain	Break	ISO 527-2/50	> 50	%
Tensile modulus		ISO 527-2/1	2300	Mpa
elongation	Break	ASTM D638	78	%
Bending modulus	50.0 mm Span	ASTM D790	2330	Mpa
bending strength	Yield, 50.0 mm Span	ASTM D790	97.0	Mpa

Thermal performance	Test Condition	Test Method	Test Result	Unit
RTI		UL 746	130	°C
RTI Imp		UL 746	130	°C
RTI Elec		UL 746	130	°C
Linear coefficient of thermal expansion - flow	-40 to 95°C	ASTM E831	8.1E-5	cm/cm/°C
Linear coefficient of thermal expansion - flow	Linear coefficient of thermal expansion - flow	23 to 80°C	ISO 11359-2	8.0E-5	cm/cm/°C
specific heat		ASTM C351	1260	J/kg/°C
thermal conductivity		ASTM C177	0.21	W/m/K
thermal conductivity	thermal conductivity		ISO 8302	0.21	W/m/K
Thermal deformation temperature under load	1.8 MPa, Unannealed, 3.20 mm	ASTM D648	148	°C
Ball Pressure Test	123 to 127°C	IEC 60695-10-2	通过
Hot deformation temperature 5	0.45 MPa, Unannealed, 4.00 mm, 100 mm Span	ISO 75-2/Be	165	°C
Hot deformation temperature 5	Hot deformation temperature 5	1.8 MPa, Unannealed, 4.00 mm, 100 mm Span	ISO 75-2/Ae	150	°C
Vicat softening temperature	--	ISO 306/A50	185	°C
	Vicat softening temperature	--	ISO 306/B50	175	°C
	Vicat softening temperature	Vicat softening temperature	--	ISO 306/B120	170	°C

Electrical performance	Test Condition	Test Method	Test Result	Unit
High arc combustion index (HAI) 5		UL 746	PLC 3
Arc resistance 4		ASTM D495	PLC 6
Compared to the Leakage Tracking Index (CTI)		UL 746	PLC 3
Hot wire ignition (HWI)		UL 746	PLC 2
High Voltage Arc Traceability Rate (HVTR)		UL 746	PLC 3
Dielectric constant	60 Hz	ASTM D150	3.27
	Dielectric constant	50 kHz	ASTM D150	3.27
	Dielectric constant	Dielectric constant	1 MHz	ASTM D150	3.10
Volume resistivity		ASTM D257	> 2.5E+17	ohms·cm
Dissipation factor	100 Hz	IEC 60250	0.026
	Dissipation factor	50 Hz	ASTM D150	1.6E-3
		Dissipation factor	60 Hz	ASTM D150	1.6E-3
		Dissipation factor	Dissipation factor	100 Hz	ASTM D150	0.026
Dielectric strength	3.20 mm, in Air	ASTM D149	20	KV/mm
Relative permittivity	1 MHz	IEC 60250	3.10

injection	Test Condition	Test Result	Unit
drying temperature		120	°C
drying temperature	drying temperature		125 到 135	°C
Suggested maximum moisture content		0.020	%
Processing (melt) temperature		350 到 370	°C
Processing (melt) temperature	Processing (melt) temperature		325 到 360	°C
Mold temperature		100 到 125	°C
Mold temperature	Mold temperature		80 到 115	°C
Hopper temperature		60 到 80	°C
drying time		3.0 到 4.0	hr
Suggested injection volume		40 到 60	%
Temperature at the rear of the barrel		325 到 350	°C
Temperature at the rear of the barrel	Temperature at the rear of the barrel		300 到 320	°C
Temperature in the middle of the barrel		310 到 330	°C
Temperature in the middle of the barrel	Temperature in the middle of the barrel		340 到 360	°C
Temperature at the front of the material cylinder		350 到 370	°C
Temperature at the front of the material cylinder	Temperature at the front of the material cylinder		320 到 340	°C
Spray nozzle temperature		320 到 340	°C
Spray nozzle temperature	Spray nozzle temperature		345 到 365	°C
Back pressure		0.300 到 0.700	Mpa
Screw speed		40 到 70	rpm
Exhaust hole depth		0.025 到 0.076	mm

Impact performance	Test Condition	Test Method	Test Result	Unit
Falling hammer impact	23°C	ASTM D3029	149	J
Impact strength of simply supported beam gap 3	-30°C	ISO 179/1eA	13	kJ/m²
Impact strength of simply supported beam gap 3	Impact strength of simply supported beam gap 3	23°C	ISO 179/1eA	46	kJ/m²
Simply supported beam without notch impact strength 3	-30°C	ISO 179/1eU	无断裂
Simply supported beam without notch impact strength 3	Simply supported beam without notch impact strength 3	23°C	ISO 179/1eU	无断裂
Suspended wall beam gap impact strength 4	-30°C	ISO 180/1A	11	kJ/m²
Suspended wall beam gap impact strength 4	Suspended wall beam gap impact strength 4	23°C	ISO 180/1A	35	kJ/m²
Unscented Izod Impact Strength 4	-30°C	ISO 180/1U	无断裂
Unscented Izod Impact Strength 4	Unscented Izod Impact Strength 4	23°C	ISO 180/1U	无断裂
Non notched cantilever beam impact	23°C	ASTM D4812	3200	J/m
Tensile impact strength 3		ASTM D1822	577	kJ/m²

hardness	Test Condition	Test Method	Test Result	Unit
Rockwell hardness	M-Scale	ASTM D785	92
	Rockwell hardness	R-Scale	ASTM D785	127
	Rockwell hardness	Rockwell hardness	R -Sale	ISO 2039-2	127

optical performance	Test Condition	Test Method	Test Result	Unit
Refractive index		ASTM D542	1.600
Haze	2540 µm	ASTM D1003	1.0	%
transmissivity	2540 µm	ASTM D1003	85.0	%

flammability	Test Condition	Test Method	Test Result	Unit
Burning wire flammability index	2.0 mm	IEC 60695-2-12	850	°C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.