PC PANLITE® MN-3600H TEIJIN JAPAN
220
- Unit Price:
- $3815 USD/MT
- Packaging Specification:
- 25 KG/PKG
- Supply Quantity:
- 10MT
- Delivery Terms:
- FOB
- Port of Loading:
- China Main Port
- Accepted Payment Methods:
- T/T
- Shipping:
- Negotiate supplier for shipping details
Supplier Information
ASIA PLASTIC EXCHANGE LIMITED
+86 755 2787 3515View
serv********View
For more detailed information including pricing, customization, and shipping, please contact supplier.
Material Description
Technical Data Sheet
Material Description
- Material Properties:heat-resisting Flame retardant Good impact resistance Good liquidity Halogen-free
- Application Areas:Electrical field Electronic field Automotive sector
- Color:--
- Grade:Injection grade
Technical Data Sheet
Compare
| Physical properties | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Molding shrinkage rate | ASTM D955 | 0.50-0.70 | % | |
| Water absorption rate 23 ℃/24h | ASTM D570/ISO 62 | 0.22 | % |
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Melt volume flow rate | 280°C/2.16kg | ISO1133 | 17.5 | cm3/10min |
| Shrinkage rate | TD:4.00mm | 内部方法 | 0.50to0.70 | % |
| MD:4.00mm | 内部方法 | 0.50to0.70 | % | |
| Water absorption rate | 23°C,24hr | ISO62 | 0.22 | % |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Tensile modulus | ISO527-2/1 | 2350 | Mpa | |
| Tensile stress | Yield | ISO527-2/50 | 60.0 | Mpa |
| Break | ISO527-2/50 | 50.0 | Mpa | |
| Tensile strain | Yield | ISO527-2/50 | 7.0 | % |
| Break | ISO527-2/50 | 100 | % | |
| Tensile modulus | ASTM D638/ISO 527 | 2350 | kg/cm²(MPa)[Lb/in²] | |
| tensile strength | ASTM D638/ISO 527 | 60.0 | kg/cm²(MPa)[Lb/in²] | |
| elongation | ASTM D638/ISO 527 | 7.0 | % | |
| Bending modulus | ASTM D790/ISO 178 | 2300 | kg/cm²(MPa)[Lb/in²] | |
| bending strength | ASTM D790/ISO 178 | 95.0 | kg/cm²(MPa)[Lb/in²] | |
| Bending modulus 2 | ISO178 | 2300 | Mpa | |
| Bending stress 2 | ISO178 | 95.0 | Mpa | |
| Tensile elongation at break (elongation at break) | ASTM D638/ISO 527 | 100 | % |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| RTIStr | 1.5mm | UL746 | 95.0 | °C |
| Hot deformation temperature | ASTM D648/ISO 75 | 125 | ℃（℉） | |
| Linear expansion coefficient | ASTM D696/ISO 11359 | 0.000070 | mm/mm.℃ | |
| Hot deformation temperature | 0.45MPa,Unannealed | ISO75-2/B | 125 | °C |
| 1.8MPa,Unannealed | ISO75-2/A | 112 | °C | |
| Linear coefficient of thermal expansion | MD | ISO11359-2 | 7E-05 | cm/cm/°C |
| TD | ISO11359-2 | 7E-05 | cm/cm/°C | |
| RTIElec | 1.5mm | UL746 | 95.0 | °C |
| Evolution Calendar intelligent importer | 1.5mm | UL746 | 95.0 | °C |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Surface resistivity | IEC60093 | >1.0E+15 | ohms |
| Impact performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Impact strength of simply supported beam without notch | ISO179 | NoBreak |
| flammability | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| UL flame retardant rating | 0.45mm | UL94 | HB | |
| 1.0mm | UL94 | V-1 | ||
| 1.5mm | UL94 | V-0 | ||
| 2.0mm | UL94 | 5VB | ||
| 3.0mm | UL94 | 5VA | ||
| Burning wire flammability index | 1.0mm | IEC60695-2-12 | 960 | °C |
| 1.5mm | IEC60695-2-12 | 930 | °C | |
| 2.0mm | IEC60695-2-12 | 960 | °C | |
| 3.0mm | IEC60695-2-12 | 930 | °C | |
| Hot filament ignition temperature | 1.0mm | IEC60695-2-13 | 875 | °C |
| 1.5mm | IEC60695-2-13 | 825 | °C | |
| 2.0mm | IEC60695-2-13 | 825 | °C | |
| 3.0mm | IEC60695-2-13 | 825 | °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.