Technical Data Sheet
Compare
| Physical properties | Test Condition | Test Method | Test Result | Unit |
|---|
| density | | ASTM D792/ISO 1183 | 1.30 | |
| Melt index (flow coefficient) | | ASTM D1238/ISO 1133 | 15 | g/10min |
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|
| Shrinkage rate | MD | ASTMD955 | 0.30到0.50 | % |
| Water absorption rate | 23°C,24hr | ASTMD570 | <0.20 | % |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Tensile strength | Break | ASTMD638 | 108 | Mpa |
| elongation | Break | ASTMD638 | 4.0 | % |
| Bending modulus | | ASTMD790 | 5690 | Mpa |
| bending strength | | ASTMD790 | 152 | Mpa |
| Bending modulus | | ASTM D-790 | 98-137 | J/m |
| elongation at break | | ASTM D638/ISO 527 | 4.0 | % |
| tensile strength | | ASTM D638/ISO 527 | 640 | kg/cm²(MPa)[Lb/in²] |
| bending strength | | ASTM D790/ISO 178 | 85 | kg/cm²(MPa)[Lb/in²] |
| Rockwell strength | | ASTM D-785 | 121 | |
| tensile strength | | ASTM D-638 | 108 | Mpa |
| bending strength | | ASTM D-790 | 5680 | Mpa |
| elongation | Break | ASTM D-638 | 4 | % |
| IZOD impact strength | V-Notched，3.2mm | ASTM D-256 | 10-14 | kJ/m² |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Combustibility (rate) | | UL94 | V-2/1.6mm | |
| Hot deformation temperature | | ASTM D648/ISO 75 | 133 | ℃（℉） |
| Hot deformation temperature | 1.8MPa,Unannealed | ASTMD648 | 145 | °C |
| Hot deformation temperature | | ASTM D-648 | 140-148 | °C |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Volume resistivity | | ASTM D257/IEC 60093 | 10^16 | Ω.cm |
| Volume resistivity | | ASTM D-25 | 1014 | Ω.cm |
| Dielectric constant | 10HZ | ASTM D-150 | 3.3 | |
| Solitary optical impedance | | ASTM D-495 | 110 | sec |
| Volume resistivity | | ASTMD257 | 1E+16 | ohms·cm |
| Dielectric strength | 1.60mm | ASTMD149 | 20 | KV/mm |
| Dielectric constant | 1MHz | ASTMD150 | 3.20 | |
| Dissipation factor | 1MHz | ASTMD150 | 8E-03 | |
| Arc resistance | | ASTMD495 | 110 | sec |
| optical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Haze | 3.00mm | ASTMD1003 | Translucent | |
| flammability | Test Condition | Test Method | Test Result | Unit |
|---|
| UL flame retardant rating | 3.0mm | UL94 | V-0 | |
| Basic performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Water absorption rate | 23 ℃ | ASTM D-570 | 0.11 | % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
