PA66 Zytel® 80G33L DUPONT USA

154

Unit Price:
$3911 USD/MT
Packaging Specification:
25 KG/PKG
Supply Quantity:
229MT
Delivery Terms:
FOB
Port of Loading:
China Main Port
Accepted Payment Methods:
T/T
Shipping:
Negotiate supplier for shipping details

Supplier Information

ASIA PLASTIC EXCHANGE LIMITED

+86 755 2787 3515View

serv********View

For more detailed information including pricing, customization, and shipping, please contact supplier.

Material Description

Technical Data Sheet

Material Description

Material Properties:Thermal stability Glass fiber reinforced
Application Areas:Electrical field Electronic field Automotive sector
Color:--
Grade:Enhanced level

Technical Data Sheet Compare

physical property	Test Condition	Test Method	Test Result	Unit
Shrinkage rate	Across Flow	ISO 294-4	0.80	%
Shrinkage rate	Shrinkage rate	流量	ISO 294-4	0.30	%
Water absorption rate	24 hr, 23°C	ISO 62	0.83	%
	Water absorption rate	Saturation, 23°C, 2.00 mm	ISO 62	4.5	%
	Water absorption rate	Water absorption rate	Equilibrium, 23°C, 2.00 mm, 50% RH	ISO 62	1.5	%

Mechanical performance	Test Condition	Test Method	Test Result	Unit
Tensile modulus		ISO 527-2	8700	Mpa
Tensile stress	Break	ISO 527-2	142	Mpa
Tensile strain	Break	ISO 527-2	4.0	%
Bending modulus		ISO 178	7400	Mpa

Thermal performance	Test Condition	Test Method	Test Result	Unit
Hot deformation temperature	0.45 MPa, Unannealed	ISO 75-2/B	262	°C
Hot deformation temperature	Hot deformation temperature	1.8 MPa, Unannealed	ISO 75-2/A	247	°C
Melting temperature 3		ISO 11357-3	262	°C
Linear coefficient of thermal expansion	Flow	ISO 11359-2	1.5E-5	cm/cm/°C
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	Across Flow	ISO 11359-2	1.2E-4	cm/cm/°C
Effective Thermal Diffusivity			8.50E-8	m²/s

Electrical performance	Test Condition	Test Method	Test Result	Unit
Leakage Trace Index		IEC 60112	--	V

Filling analysis	Test Method	Test Result	Unit
Melt density		1.12	g/cm³
Top out temperature		210	°C
Specific Heat Capacity of Melt		2200	J/kg/°C
Thermal Conductivity of Melt		0.22	W/m/K
Emission of Organic Compounds	VDA 277	25.0	µgC/g
Odor	VDA 270	3.00

injection	Test Condition	Test Method	Test Result	Unit
drying temperature			80	°C
Drying time - hot air dryer			2.0 到 4.0	hr
Suggested maximum moisture content			0.20	%
Processing (melt) temperature			285 到 305	°C
Melt Temperature, Optimum			295	°C
Mold temperature			50 到 100	°C
Mold Temperature, Optimum			80	°C
Maintain pressure			50.0 到 100	Mpa
Maintain pressure	Maintain pressure	Drying Recommended		yes
Hold Pressure Time			3.00	s/mm
Maximum Screw Tangential Speed			12	m/min

Impact performance	Test Condition	Test Method	Test Result	Unit
Impact strength of simply supported beam without notch	-30°C	ISO 179/1eU	80	kJ/m²
Impact strength of simply supported beam without notch	Impact strength of simply supported beam without notch	23°C	ISO 179/1eU	91	kJ/m²
Unscented Izod impact strength	-30°C	ISO 180/1U	80	kJ/m²
Unscented Izod impact strength	Unscented Izod impact strength	23°C	ISO 180/1U	74	kJ/m²

flammability	Test Condition	Test Method	Test Result	Unit
Burning rate	1.00 mm	ISO 3795	23	mm/min
UL flame retardant rating	0.75 mm	UL 94, IEC 60695-11-10, -20	HB
UL flame retardant rating	UL flame retardant rating	1.5 mm	UL 94, IEC 60695-11-10, -20	HB
Extreme Oxygen Index		ISO 4589-2	23	%
FMVSS flammability		FMVSS 302	SE/B
雾化 - G-value (condensate)		ISO 6452	8.0E-4	g

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.