PA66 Vydyne® 20NSP NC ASCEND USA
122
Unit Price:$3288 USD/MT
- Packaging Specification:
- 25 KG/PKG
- Supply Quantity:
- 76.5MT
- Delivery Terms:
- FOB
- Port of Loading:
- China Main Port
- Accepted Payment Methods:
- T/T
- Shipping:
- Negotiate supplier for shipping details
Supplier Information
ASIA PLASTIC EXCHANGE LIMITED
+86 755 2787 3515View
serv********View
For more detailed information including pricing, customization, and shipping, please contact supplier.
Material Description
Technical Data Sheet
Material Description
- Material Properties:--
- Application Areas:--
- Color:--
- Grade:Injection grade
Technical Data Sheet
Compare
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Shrinkage rate | TD:23°C,2.00mm | ISO294-4 | 1.6 | % |
| MD:23°C,2.00mm | ISO294-4 | 1.4 | % | |
| Water absorption rate | 23°C,24hr | ISO62 | 1.2 | % |
| Equilibrium,23°C,50%RH | ISO62 | 2.4 | % | |
| Outdoor applicability | UL746C | f2 |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Tensile modulus | 23°C | ISO527-2 | 3800 | Mpa |
| Tensile stress | Yield,23°C | ISO527-2 | 95.0 | Mpa |
| Break,23°C | ISO527-2 | 75.0 | Mpa | |
| Tensile strain | Yield,23°C | ISO527-2 | 5.0 | % |
| Nominal tensile fracture strain | 23°C | ISO527-2 | 13 | % |
| Bending modulus | 23°C | ISO178 | 3200 | Mpa |
| bending strength | 23°C | ISO178 | 100 | Mpa |
| Poisson's ratio | ISO527-2 | 0.40 |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| RTIElec | 0.40mm | UL746 | 130 | °C |
| 0.71mm | UL746 | 130 | °C | |
| 1.5mm | UL746 | 130 | °C | |
| 3.0mm | UL746 | 130 | °C | |
| Evolution Calendar intelligent importer | 0.40mm | UL746 | 75.0 | °C |
| 0.71mm | UL746 | 75.0 | °C | |
| 1.5mm | UL746 | 75.0 | °C | |
| 3.0mm | UL746 | 75.0 | °C | |
| RTIStr | 0.40mm | UL746 | 75.0 | °C |
| 0.71mm | UL746 | 85.0 | °C | |
| 1.5mm | UL746 | 85.0 | °C | |
| 3.0mm | UL746 | 85.0 | °C | |
| Hot deformation temperature | 0.45MPa,Unannealed | ISO75-2/B | 230 | °C |
| 1.8MPa,Unannealed | ISO75-2/A | 90.0 | °C | |
| Melting temperature | ISO11357-3 | 260 | °C | |
| Linear coefficient of thermal expansion | MD：23to55°C,2.00mm | ISO11359-2 | 1E-04 | cm/cm/°C |
| TD：23to55°C,2.00mm | ISO11359-2 | 1E-04 | cm/cm/°C |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| High voltage arc tracing rate | HVTR | UL746 | PLC0 | |
| Hot wire ignition (HWI) | 0.40mm | UL746 | PLC4 | |
| 0.71mm | UL746 | PLC4 | ||
| 1.5mm | UL746 | PLC3 | ||
| 3.0mm | UL746 | PLC2 | ||
| VolumeResistivity | 0.750mm | IEC60093 | 1E+13 | ohms·cm |
| Dielectric strength | 1.00mm | IEC60243 | 26 | KV/mm |
| Arc resistance | 3.00mm | ASTMD495 | PLC5 | |
| Leakage Trace Index | 3.00mm | IEC60112 | 600 | V |
| High arc combustion index (HAI) | 0.40mm | UL746 | PLC1 | |
| 0.71mm | UL746 | PLC0 | ||
| 1.5mm | UL746 | PLC0 | ||
| 3.0mm | UL746 | PLC0 |
| Impact performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Impact strength of simply supported beam without notch | -30°C | ISO179/1eU | NoBreak | |
| 23°C | ISO179/1eU | NoBreak |
| flammability | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Burning wire flammability index | 0.71mm | IEC60695-2-12 | 960 | °C |
| 1.5mm | IEC60695-2-12 | 960 | °C | |
| 3.0mm | IEC60695-2-12 | 960 | °C | |
| Hot filament ignition temperature | 0.40mm | IEC60695-2-13 | 825 | °C |
| 0.71mm | IEC60695-2-13 | 850 | °C | |
| 1.5mm | IEC60695-2-13 | 850 | °C | |
| 3.0mm | IEC60695-2-13 | 850 | °C | |
| Extreme Oxygen Index | ISO4589-2 | 26 | % | |
| UL flame retardant rating | 0.40mm | UL94 | V-2 | |
| 0.71mm | UL94 | V-2 | ||
| 1.5mm | UL94 | V-2 | ||
| 3.0mm | UL94 | V-2 | ||
| Burning wire flammability index | 0.40mm | IEC60695-2-12 | 960 | °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top