Technical Data Sheet
Compare
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|
| Shrinkage rate | MD | ASTMD955 | 0.60到0.90 | % |
| Water absorption rate | 23°C,24hr | ASTMD570 | 0.45 | % |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Tensile modulus | | ASTM D-638 | 276 | Mpa |
| tensile strength | | ASTM D-638 | 10.3 | Mpa |
| hardness | shoreD | ASTM D-2240 | 55 | |
| Tensile modulus | | ASTMD638 | 276 | Mpa |
| Tensile strength | Yield | ASTMD638 | 10.3 | Mpa |
| elongation | Break | ASTMD638 | 10 | % |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Flame retardant grade | | UL 94 | HB | |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Surface resistivity | | ASTMD257 | 1E+12 | ohms |
| Impact performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Cantilever beam without notch impact strength | 3.18mm | ASTMD4812 | 1100 | J/m |
| hardness | Test Condition | Test Method | Test Result | Unit |
|---|
| Shore hardness | Shore D | ASTMD2240 | 55 | |
| flammability | Test Condition | Test Method | Test Result | Unit |
|---|
| UL flame retardant rating | 1.6mm | UL94 | HB | |
| Basic performance | Test Condition | Test Method | Test Result | Unit |
|---|
| density | | ASTM D-792 | 1.15 | g/cm |
| Shrinkage rate | | ASTM D-955 | 0.6-0.9 | % |
| Water absorption rate | 24hr,23℃ | | 0.45 | % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
