PA6 Amilan® CM1007 TORAY JAPAN
154
Unit Price:$3443 USD/MT
- Packaging Specification:
- 25 KG/PKG
- Supply Quantity:
- 76.5MT
- Delivery Terms:
- FOB
- Port of Loading:
- China Main Port
- Accepted Payment Methods:
- T/T
- Shipping:
- Negotiate supplier for shipping details
Supplier Information
ASIA PLASTIC EXCHANGE LIMITED
+86 755 2787 3515View
serv********View
For more detailed information including pricing, customization, and shipping, please contact supplier.
Material Description
Technical Data Sheet
Material Description
- Material Properties:Low viscosity High mobility
- Application Areas:Electrical appliances
- Color:--
- Grade:Injection grade
Technical Data Sheet
Compare
| Physical properties | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| density | ASTM D792/ISO 1183 | 1.13 | ||
| Water absorption rate 23 ℃/24h | ASTM D570/ISO 62 | 1.8 | % |
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Shrinkage rate | MD：1.00mm3 | % | 0.50到1.0 | -- |
| MD：3.00mm4 | % | 1.0到1.6 | -- | |
| Water absorption rate | 23°C,24hr | % | 1.8 | -- |
| Saturation,23°C | % | 11 | -- | |
| Taber wear amount | 1000g,CS-17 | ASTM D-1044 | 无水｜3-4 | mg/1000次 |
| 1000g,CS-17 | ASTM D-1044 | 3.5%水｜- | mg/1000次 |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Tensile yield strength | 80℃ | ASTM D-638 | 无水｜270 | kg/cm2 |
| 80℃ | ASTM D-638 | 3.5%水｜200 | kg/cm2 | |
| Tensile fracture strength | 23℃ | 无水｜700 | kg/cm2 | |
| 23℃ | 3.5%水｜- | kg/cm2 | ||
| Rockwell hardness | 80℃ | ASTM D-785 | 无水｜80 | R-标度 |
| 80℃ | ASTM D-785 | 3.5%水｜- | R-标度 | |
| Tensile yield strength | 23℃ | ASTM D-638 | 无水｜760 | kg/cm2 |
| 23℃ | ASTM D-638 | 3.5%水｜350 | kg/cm2 | |
| Shear strength | 23℃ | ASTM D-732 | 无水｜720 | kg/cm2 |
| 23℃ | ASTM D-732 | 3.5%水｜650 | kg/cm2 | |
| Rockwell hardness | ASTM D785 | 80 | ||
| bending strength | ASTM D790/ISO 178 | 3.8 | kg/cm²(MPa)[Lb/in²] | |
| Tensile stress | -40°C | MPa | 110 | |
| 23°C | MPa | 80.0 | 35.0 | |
| 80°C | MPa | 25.0 | 20.0 | |
| Tensile strain | Yield,23°C | % | 2.0 | -- |
| Flexural strength | 80℃ | ASTM D-790 | 无水｜430 | kg/cm2 |
| 80℃ | ASTM D-790 | 3.5%水｜250 | kg/cm2 | |
| 23℃ | ASTM D-790 | 无水｜1000 | kg/cm2 | |
| 23℃ | ASTM D-790 | 3.5%水｜400 | kg/cm2 | |
| Tensile yield strength | -40℃ | ASTM D-638 | 无水｜1130 | kg/cm2 |
| -40℃ | ASTM D-638 | 3.5%水｜1000 | kg/cm2 | |
| Flexural modulus | 23℃ | ASTM D-790 | 无水｜25000 | kg/cm2 |
| 23℃ | ASTM D-790 | 3.5%水｜8000 | kg/cm2 | |
| Flexural strength | -40℃ | ASTM D-790 | 无水｜1400 | kg/cm2 |
| -40℃ | ASTM D-790 | 3.5%水｜1300 | kg/cm2 | |
| Friction coefficient vs. Metal5 | 0.15到0.20 | -- | ||
| compressive strength | 23℃ | ASTM D-695 | 无水｜840 | kg/cm2 |
| 23℃ | ASTM D-695 | 3.5%水｜- | kg/cm2 | |
| elongation at break | 23℃ | ASTM D-638 | 无水｜130 | % |
| 23℃ | ASTM D-638 | 3.5%水｜< 200 | % | |
| Flexural modulus | 80℃ | ASTM D-790 | 无水｜7000 | kg/cm2 |
| 80℃ | ASTM D-790 | 3.5%水｜3000 | kg/cm2 | |
| -40℃ | ASTM D-790 | 无水｜39000 | kg/cm2 | |
| -40℃ | ASTM D-790 | 3.5%水｜37000 | kg/cm2 | |
| Rockwell hardness | 23℃ | ASTM D-785 | 无水｜119 | R-标度 |
| 23℃ | ASTM D-785 | 3.5%水｜88 | R-标度 | |
| Tensile strain | Break,23°C | % | 35 | |
| Bending modulus | -40°C | MPa | 3800 | 3600 |
| 23°C | MPa | 2800 | ||
| 80°C | MPa | 700 | 300 | |
| Bending stress | -40°C | MPa | 135 | |
| 23°C | MPa | 110 | 40.0 | |
| 80°C | MPa | 40.0 | 25.0 | |
| Compressive stress | 23°C | MPa | 80.0 | -- |
| shear strength | 23°C | MPa | 70.0 | 65.0 |
| Taber abraser | 1000Cycles | mg | 3.00到4.00 | -- |
| IZOD impact strength | V-Notched1/2，23℃ | 无水｜5 | kg.cm/cm | |
| V-Notched1/2，23℃ | 3.5%水｜40 | kg.cm/cm |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| thermal conductivity | 无水｜0.18 | Kcal/m·hr·℃ | ||
| 3.5%水｜- | Kcal/m·hr·℃ | |||
| heat deflection temperature | 4.6kg/cm2 | ASTM D-695 | 无水｜182 | °C |
| 4.6kg/cm2 | ASTM D-695 | 3.5%水｜- | °C | |
| Linear coefficient of thermal expansion | ASTM D-696 | 无水｜0.18 | ×10-5cm/cm/℃ | |
| ASTM D-696 | 3.5%水｜- | ×10-5cm/cm/℃ | ||
| ASTM D-696 | 无水｜8 | ×10-5cm/cm/℃ | ||
| melting point | 差示扫描测热计DSC | 无水｜225 | °C | |
| Hot deformation temperature | 0.45MPa,Unannealed | °C | 182 | -- |
| Melting temperature | °C | 225 | -- | |
| Linear coefficient of thermal expansion | MD | cm/cm/°C | 8E-05 | -- |
| specific heat | J/kg/°C | 1900 | -- | |
| thermal conductivity | W/m/K | 0.25 | -- | |
| melting point | 差示扫描测热计DSC | 3.5%水｜- | °C | |
| UL-94 flame retardant grade | UL 94 | 无水｜V-2(1/32") | ||
| UL 94 | 3.5%水｜- | |||
| specific heat | 无水｜0.46 | Cal/g·℃ | ||
| 3.5%水｜- | Cal/g·℃ | |||
| melting point | 225 | ℃（℉） |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Volume resistivity | ASTM D257/IEC 60093 | 10^12~13 | Ω.cm | |
| ohms·cm | 1.0E+14到1.0E+15 | 1.0E+11到1.0E+12 | ||
| Dielectric strength | kV/mm | 20 | -- | |
| Dielectric constant 6 | 23°C,50Hz | 4.10 | 9.00 | |
| 23°C,1kHz | 3.90 | 8.00 | ||
| 23°C,1MHz | 3.40 | 4.50 | ||
| Dissipation factor 6 | 23°C,50Hz | 0.070 | 0.10 | |
| 23°C,1kHz | 0.060 | 0.11 | ||
| 23°C,1MHz | 0.030 | 0.13 | ||
| Arc resistance 7 | sec | 120 | -- | |
| Compared to the anti leakage trace index | CTI | V | 600 | -- |
| Arc resistance | 1/8 | ASTM D-495 | 无水｜121 | 秒 |
| 1/8 | ASTM D-495 | 3.5%水｜- | 秒 | |
| Dielectric constant | 103Hz | ASTM D-150 | 无水｜3.9 | |
| 103Hz | ASTM D-150 | 3.5%水｜- | ||
| Loss factor | 106Hz | ASTM D-150 | 无水｜0.03 | |
| 106Hz | ASTM D-150 | 3.5%水｜- | ||
| IEC Conductive Track Index | UL 746 | 无水｜≤600 | V | |
| UL 746 | 3.5%水｜- | V | ||
| Volume resistivity | ASTM D-257 | 无水｜1014-1015 | Ω.cm | |
| ASTM D-257 | 3.5%水｜1011-1012 | Ω.cm | ||
| Loss factor | 103Hz | ASTM D-150 | 无水｜0.06 | |
| 103Hz | ASTM D-150 | 0.06｜- | ||
| Dielectric constant | 106Hz | ASTM D-150 | 无水｜3.4 | |
| 106Hz | ASTM D-150 | 3.5%水｜- | ||
| 50Hz | ASTM D-150 | 无水｜4.1 | ||
| 50Hz | ASTM D-150 | 3.5%水｜- | ||
| Dielectric strength | 1/8 | ASTM D-149 | 无水｜20 | KV/mm |
| 1/8 | ASTM D-149 | 3.5%水｜- | KV/mm | |
| Loss factor | 50Hz | ASTM D-150 | 无水｜0.07 | |
| 50Hz | ASTM D-150 | 3.5%水｜- |
| Impact performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Impact strength of simply supported beam without notch | -40°C | 无断裂 | -- | |
| 23°C | 无断裂 | -- |
| hardness | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Rockwell hardness | R-Sale,23°C | 119 | ||
| R-Sale,80°C | 80 | -- |
| flammability | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| UL flame retardant rating | 0.79mm | V-2 | -- |
| Basic performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Water absorption rate | 23℃，24hr | ASTM D-570 | 无水｜1.8 | % |
| 23℃，24hr | ASTM D-570 | 3.5%水｜- | % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top