PPO NORYL™ SE1X WH8632 SABIC INNOVATIVE SHANGHAI
152
Unit Price:$4774 USD/MT
- Packaging Specification:
- 25 KG/PKG
- Supply Quantity:
- 10MT
- Delivery Terms:
- FOB
- Port of Loading:
- China Main Port
- Accepted Payment Methods:
- T/T
- Shipping:
- Negotiate supplier for shipping details
Supplier Information
ASIA PLASTIC EXCHANGE LIMITED
+86 755 2787 3515View
serv********View
For more detailed information including pricing, customization, and shipping, please contact supplier.
Material Description
Technical Data Sheet
Material Description
- Material Properties:High temperature resistan Hydrolysis resistance
- Application Areas:Electronic and electrical Mechanical component cove Household products
- Color:--
- Grade:Injection grade
Technical Data Sheet
Compare
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Shrinkage rate | Flow : 3.20 mm | 内部方法 | 0.50 到 0.70 | % |
| Across Flow 2 | 内部方法 | 0.50 到 0.70 | % | |
| Water absorption rate | 24 hr | ASTM D570 | 0.060 | % |
| Outdoor applicability | UL 746C | f1 |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Elongation rate | Yield | ASTM D638 | 8.1 | % |
| Break | ASTM D638 | 20 | % | |
| Tensile strength | Yield | ASTM D638 | 67.0 | Mpa |
| Break | ASTM D638 | 53.0 | Mpa | |
| Dart impact equipped with measuring instruments | -30°C, Energy at Peak | ASTM D3763 | 32.0 | J |
| 23°C, Energy at Peak | ASTM D3763 | 51.0 | J | |
| Bending modulus | 100 mm Span | ASTM D790 | 2500 | Mpa |
| bending strength | Yield, 100 mm Span | ASTM D790 | 102 | Mpa |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Thermal deformation temperature under load | 0.45 MPa, Unannealed, 6.40 mm | ASTM D648 | 126 | °C |
| 1.8 MPa, Unannealed, 6.40 mm | ASTM D648 | 117 | °C | |
| RTI | UL 746 | 110 | °C | |
| RTI Imp | UL 746 | 105 | °C | |
| RTI Elec | UL 746 | 110 | °C |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Compared to the Leakage Tracking Index (CTI) | UL 746 | PLC 1 | ||
| High Voltage Arc Traceability Rate (HVTR) | UL 746 | PLC 4 | ||
| Arc resistance | ASTM D495 | PLC 6 | ||
| Surface resistivity | ASTM D257 | > 1.0E+15 | ohms | |
| Dielectric constant | 60 Hz | ASTM D150 | 2.52 | |
| 50 kHz | ASTM D150 | 2.52 | ||
| 1 MHz | ASTM D150 | 2.46 | ||
| Volume resistivity | ASTM D257 | 2.3E+16 | ohms·cm | |
| Dissipation factor | 50 Hz | ASTM D150 | 3.4E-3 | |
| 60 Hz | ASTM D150 | 3.4E-3 | ||
| 1 MHz | ASTM D150 | 2.1E-3 | ||
| Dielectric strength | 3.20 mm, in Oil | ASTM D149 | 18 | KV/mm |
| injection | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| drying time | 3.0 到 4.0 | hr | ||
| Suggested injection volume | 30 到 70 | % | ||
| Temperature at the rear of the barrel | 250 到 300 | °C | ||
| Temperature in the middle of the barrel | 260 到 305 | °C | ||
| Temperature at the front of the material cylinder | 270 到 310 | °C | ||
| Spray nozzle temperature | 280 到 310 | °C | ||
| Back pressure | 0.300 到 0.700 | Mpa | ||
| Screw speed | 20 到 100 | rpm | ||
| drying temperature | 105 到 110 | °C | ||
| Suggested maximum moisture content | 0.020 | % | ||
| Processing (melt) temperature | 280 到 310 | °C | ||
| Mold temperature | 75 到 105 | °C |
| flammability | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| UL flame retardant rating | 1.5 mm | UL 94 | V-1 | |
| 6.0 mm | UL 94 | V-0 | ||
| Radiant Panel Listing | RP100 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top