PC LEXAN™ 953A-116 SABIC INNOVATIVE NANSHA
122
- Unit Price:
- $3383 USD/MT
- Packaging Specification:
- 25 KG/PKG
- Supply Quantity:
- 10MT
- Delivery Terms:
- FOB
- Port of Loading:
- China Main Port
- Accepted Payment Methods:
- T/T
- Shipping:
- Negotiate supplier for shipping details
Supplier Information
ASIA PLASTIC EXCHANGE LIMITED
+86 755 2787 3515View
serv********View
For more detailed information including pricing, customization, and shipping, please contact supplier.
Material Description
Technical Data Sheet
Material Description
- Material Properties:high viscosity Flame retardant UV resistance
- Application Areas:Household appliances Lighting fixtures
- Color:--
- Grade:Injection grade
Technical Data Sheet
Compare
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Water absorption rate | 24hr | ASTMD570 | 0.15 | % |
| Equilibrium,23°C | ASTMD570 | 0.35 | % | |
| Equilibrium,100°C | ASTMD570 | 0.58 | % | |
| Melt mass flow rate | 300°C/1.2kgf | ASTMD1238 | 7 | g/10min |
| Specific volume | ASTMD792 | 0.83 | cm³/g | |
| Mold shrinkage flow, 3.2mm | SABICMethod | 0.5-0.7 | % | |
| Density/specific gravity | ASTMD792 | 1.217 | g/cm³ | |
| ASTMD792 | 1.21 | - |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Taber abraser | CS-17,1kg | ASTMD1044 | 10 | mg/1000cy |
| Rockwell hardness | M-Scale | ASTMD785 | 70 | - |
| R-Scale | ASTMD785 | 118 | - | |
| Bending modulus | 1.3mm/min,50mmSpan | ASTMD790 | 22800 | Kgf/cm2 |
| Tensile stress | TypeI,50mm/min | ASTMD638 | 630 | Kgf/cm2 |
| TypeI,50mm/min | ASTMD638 | 560 | Kgf/cm2 | |
| Tensile strain | TypeI,50mm/min | ASTMD638 | 7 | % |
| TypeI,50mm/min | ASTMD638 | 90 | % | |
| Bending stress | 1.3mm/min,50mmSpan | ASTMD790 | 920 | Kgf/cm2 |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Vicat softening temperature | 速率B/50 | ASTMD1525 | 151 | °C |
| thermal conductivity | ASTMC177 | 0.19 | W/m-°C | |
| HDT，0.45MPa，6.4mm， Unanealed | ASTMD648 | 137 | °C | |
| HDT，1.82MPa，6.4mm， Unanealed | ASTMD648 | 132 | °C | |
| CTE, -40 ° C to 95 ° C, flowing | ASTME831 | 6.84E-05 | 1/°C | |
| Relative temperature index, Elec | UL746B | 130 | °C | |
| Relative temperature index, Mechw/impact | UL746B | 120 | °C | |
| Relative temperature index, Mechw/oimpact | UL746B | 130 | °C |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Hot wire ignition | HWI){PLC} | UL746A | 2 | PLCCode |
| High voltage arc tracing rate | HVTR){PLC} | UL746A | 3 | PLCCode |
| Dielectric strength, in air, 3.2mm | ASTMD149 | 16.7 | KV/mm | |
| Relative permittivity, 50/60Hz | ASTMD150 | 3.01 | - | |
| Relative permittivity, 1MHz | ASTMD150 | 2.96 | - | |
| Dissipation factor, 50/60Hz | ASTMD150 | 0.0009 | - | |
| Dissipation factor, 1MHz | ASTMD150 | 0.01 | - | |
| Arc resistance, Tungsten{PLC} | ASTMD495 | 7 | PLCCode | |
| HighAmpereArcIgn,surface{PLC} | UL746A | 2 | PLCCode | |
| Compared to the anti leakage trace index | UL){PLC} | UL746A | 3 | PLCCode |
| Volume resistivity | ASTMD257 | >1.E+17 | ohm-cm |
| Impact performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Cantilever beam without notch impact strength | 23°C | ASTMD4812 | 326 | cm-kgf/cm |
| Tensile impact strength | S型 | ASTMD1822 | 535 | cm-kgf/cm² |
| Impact strength of cantilever beam gap | 23°C | ASTMD256 | 65 | cm-kgf/cm |
| Dart impact (D3029), 23 ℃ | ASTMD3029 | 1728 | cm-kgf |
| optical performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Refractive index | ASTMD542 | 1.586 | - | |
| LightTransmission,2.54mm | ASTMD1003 | 85 | % | |
| Haze,2.54mm | ASTMD1003 | 1 | % |
| flammability | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| UL certification, 94V-2 flame rating | UL94 | 1.47 | mm | |
| UL certification, 94V-0 flame rating | UL94 | 2.99 | mm | |
| UV-light,waterexposure/immersion | UL746C | F1 | - |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.