Technical Data Sheet
Compare
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|
| Water absorption rate | 24hr | ASTMD570 | 0.20 | % |
| Colorb-Hunter3 | | ASTME308 | <1.00 | |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Tensile strength | Yield | ASTMD638 | 53.0 | Mpa |
| Tensile strength | Break | ASTMD638 | 26.0 | Mpa |
| Elongation rate 4 | Yield | ASTMD638 | 5.0 | % |
| Elongation rate 4 | Break | ASTMD638 | 70 | % |
| Bending modulus | | ASTMD790 | 2150 | Mpa |
| Bending strength 5 | | ASTMD790 | 80.0 | Mpa |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Hot deformation temperature | 0.45MPa,Unannealed | ASTMD648 | 74.0 | °C |
| Hot deformation temperature | 1.8MPa,Unannealed | ASTMD648 | 70.0 | °C |
| Vicat softening temperature | | ASTMD15256 | 83.0 | °C |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Surface resistivity | | ASTMD257 | 1E+16 | ohms |
| Volume resistivity | | ASTMD257 | 1E+15 | ohms·cm |
| Dielectric strength 7 | | ASTMD149 | 16 | KV/mm |
| Dielectric constant | 1kHz | ASTMD150 | 2.60 | |
| Dielectric constant | 1MHz | ASTMD150 | 2.40 | |
| Dissipation factor | 1kHz | ASTMD150 | 5E-03 | |
| Dissipation factor | 1MHz | ASTMD150 | 0.023 | |
| hardness | Test Condition | Test Method | Test Result | Unit |
|---|
| Rockwell hardness | R-Scale | ASTMD785 | 116 | |
| optical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| gloss | 60° | ASTME308 | 159 | |
| Refractive index | | ASTMD542 | 1.570 | |
| transmissivity | | ASTMD1003 | 89.0 | % |
| Haze | | ASTMD1003 | <1.0 | % |
| flammability | Test Condition | Test Method | Test Result | Unit |
|---|
| UL flame retardant rating | 1.0mm | UL94 | HB | |
| UL flame retardant rating | 1.5mm | UL94 | HB | |
| UL flame retardant rating | 3.0mm | UL94 | V-2 | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
