PBT Cristin® ST820 NC010 DUPONT USA

122

Unit Price:
$6819 USD/MT
Packaging Specification:
25 KG/PKG
Supply Quantity:
35MT
Delivery Terms:
FOB
Port of Loading:
China Main Port
Accepted Payment Methods:
T/T
Shipping:
Negotiate supplier for shipping details

Supplier Information

ASIA PLASTIC EXCHANGE LIMITED

+86 755 2787 3515View

serv********View

For more detailed information including pricing, customization, and shipping, please contact supplier.

Material Description

Technical Data Sheet

Material Description

Material Properties:High impact resistance
Application Areas:Electronic and electrical
Color:--
Grade:Toughened grade

Technical Data Sheet Compare

Physical properties	Test Method	Test Result	Unit
density	ASTM D792/ISO 1183	1220
Molding shrinkage rate	ASTM D955	1.8	%
Water absorption rate 23 ℃/24h	ASTM D570/ISO 62	0.12	%

physical property	Test Condition	Test Method	Test Result	Unit
Shrinkage rate	TD	ISO294-4	1.8	%
	Shrinkage rate	MD2	ISO294-4	2.5	%
	Shrinkage rate	Shrinkage rate	MD	ISO294-4	1.9	%
Water absorption rate	Saturation,23°C,2.00mm	ISO62	0.31	%
Water absorption rate	Water absorption rate	Equilibrium,23°C,2.00mm,50%RH	ISO62	0.12	%
MediumDensity			1.03	g/cm³
Top out temperature			170	°C
SpecificHeatCapacity of Melt			2100	J/kg/°C
ThermalConductivityofMelt			0.20	W/m/K

Mechanical performance	Test Condition	Test Method	Test Result	Unit
Bending stress		ISO178	50.0	Mpa
compressive strength	23℃	MPa	ASTM D695	43
Across Flow	23℃	%	ASTM D638	150
Low temperature notch impact strength		J/m	ASTM D256	117
Nominal tensile fracture strain		ISO527-2	>50	%
Non notched impact strength	-，-40℃	J/m	ASTM D256	No Break
Non notched impact strength	Non notched impact strength	-，23℃	J/m	ASTM D256	No Break
Tensile stress	Yield	ISO527-2	38.0	Mpa
Tensile strain	Yield	ISO527-2	7.0	%
Gap impact strength	-，-40℃	J/m	ASTM D256	117
Gap impact strength	Gap impact strength	-，23℃	J/m	ASTM D256	No Break
elongation at break		ASTM D638/ISO 527	150	%
Tensile modulus		ASTM D638/ISO 527	1700	kg/cm²(MPa)[Lb/in²]
	Tensile modulus		ISO527-2	1700	Mpa
	Tensile modulus	Tensile modulus	23℃	MPa	ASTM D638	1600
tensile strength	23℃	MPa	ASTM D638	37
Bending modulus	23℃	MPa	ASTM D790	1680
	Bending modulus		ISO178	1550	Mpa
	Bending modulus	Bending modulus		ASTM D790/ISO 178	1550	kg/cm²(MPa)[Lb/in²]
bending strength		ASTM D790/ISO 178	50	kg/cm²(MPa)[Lb/in²]
bending strength	bending strength	23℃	MPa	ASTM D638	53

Thermal performance	Test Condition	Test Method	Test Result	Unit
Combustibility (rate)		UL94	HB(0.8mm)
Hot deformation temperature		ASTM D648/ISO 75	100	℃（℉）
	Hot deformation temperature		ASTM D648/ISO 75	145	℃（℉）
		Hot deformation temperature	0.45MPa,Unannealed	ISO75-2/B	100	°C
			Hot deformation temperature	0.45MPa,Annealed	ISO75-2/B	145	°C
				Hot deformation temperature	1.8MPa,Unannealed	ISO75-2/A	50.0	°C
					Hot deformation temperature	-，66 psi， Unannealed	℃	ASTM D648
					Hot deformation temperature	Hot deformation temperature	-，264 psi，Unannealed	℃	ASTM D648	47
melting point		℃	DSC	225
melting point	melting point			225	℃（℉）
vicat softening point		ASTM D1525/ISO R306	216	℃（℉）
Linear coefficient of thermal expansion	MD	ISO11359-2	1.9E-04	cm/cm/°C
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	TD	ISO11359-2	1.9E-04	cm/cm/°C
Linear coefficient of thermal expansion	-，平行Flow	cm/cm/℃	ASTM E831	0.00019
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	-，垂直Flow	cm/cm/℃	ASTM E831	0.00019
Vicat softening temperature		ISO306/B50	125	°C
Melting temperature 5		ISO11357-3	225	°C

Electrical performance	Test Condition	Test Method	Test Result	Unit
Dielectric strength		IEC60243-1	27	KV/mm
Leakage Trace Index		IEC60112	600	V
Dissipation factor	100Hz	IEC60250	0.020
Dissipation factor	Dissipation factor	1MHz	IEC60250	0.019
Surface resistivity		ASTM D257/IEC 60093	1.00E+15	Ω
Surface resistivity	Surface resistivity		IEC60093	1E+15	ohms
Volume resistivity		IEC60093	>1.0E+15	ohms·cm
Volume resistivity	Volume resistivity		ASTM D257/IEC 60093	>1E13	Ω.cm

Impact performance	Test Condition	Test Method	Test Result	Unit
Impact strength of simply supported beam without notch	-30°C	ISO179/1eU	NoBreak
Impact strength of simply supported beam without notch	Impact strength of simply supported beam without notch	23°C	ISO179/1eU	NoBreak
Unscented Izod impact strength	-40°C	ISO180/1U	270	kJ/m²
	Unscented Izod impact strength	-30°C	ISO180/1U	NoBreak
	Unscented Izod impact strength	Unscented Izod impact strength	23°C	ISO180/1U	NoBreak

hardness	Test Condition	Test Method	Test Result	Unit
Rockwell hardness	R-Scale	ISO2039-2	104

flammability	Test Condition	Test Method	Test Result	Unit
UL flame retardant rating	0.8mm	UL94	HB
UL flame retardant rating	UL flame retardant rating	0.8mm	IEC60695-11-10,-20	HB
Extreme Oxygen Index		ISO4589-2	19	%
FMVSS flammability		FMVSS302	B
Fogging-G-value	condensate	ISO6452	1E-04	g
Burning rate 4	1.00mm	ISO3795	38	mm/min

Other performance	Test Condition	Test Method	Test Result	Unit
Extreme Oxygen Index		%	ASTM D2863	22

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.